MODEL NO.: HPBC – 10
OPERATIONAL MANUAL
  1. Before connecting the pneumatic hose connector with machine please check the FRL is fitted with pneumatic hose line and the hose in safe working condition.
  2. Connect the pneumatic connector with the tool.
  3. Check the on line air pressure.
  4. Moves the jaws forward and backward for some times and check two jaw blades are in line.
  5. Before starting to use the tool please check the rod diameter and the tensile strength of the material is within the capability of the machine.
  6. Place the rod to be cut between two jaws and press the trigger. Keep cutter jaws at right angle to piece being cut.
SAFETY INSTRUCTIONS
  1. Wear your safety shoes, gloves, safety glasses and helmet at all times.
  2. Remove oil or grease from your hands, tools and from the floor and area where you will be working.
  3. Use proper cutting tool as per type, size and hardness of metal to be cut.
  4. Do not twist or pry with tool while cutting.
  5. Keep all the bolts tight and joints oiled at all times.
  6. You will be always safe from flying metal for hard material Cutting.
 
PNEUMATIC POWER TOOLS & CO.
India Office:
68B, A.P.C. Road, 2nd Floor, A. K. Point, Kolkata – 700 009, India
Ph. No.: +91-33-2352 2813, +91-33-2443 6211 | Mobile: +91-9830869960, +91-9830647905 | Fax No: +91-33-3508892 | Email: info@strappingtoolppt.com

North America Office:
35 Bruce Drive, Shelton, CT 06484
Phone: +208-305-2281 | E-Mail – aveek.datta@romipackaging.com / lina.datta@romipackaging.com
(Contact Romi Packaging www.romipackaging.com for sales inquiry in North America, Mexico and LATAM)

Dubai Office:
Seema Ajit, 324,Sultan Business Center, DUBAI, U.A.E.
Phone - 0097142286318, 00971506510896, 00971505591389 | Email: ajitdxb@eim.ae