All PPT Rod Cutters are designed for heavy duty rod cutting operations for various applications in steel industries and also for longer service life.

FEATURES

Forged alloy steel heat treated “C” frame type cylinder body used. Single return spring design Special quality sealing for specified pressure High wear resistant Moving cutter guide square bushing for accurate cutter alignment  Easy to operate & maintain Lighter in weight than Cast Steel design Unique design of cutters and special steel used for longer life  Wide range of Power Pack used for different application of the user requirement Single piece ram & piston design for easy maintenance  Suitable tool hanger fitted to positioning the tool at any angle for easy to operate

SPECIFICATIONS

There are three types of cutters available for hydraulic rod cutters

TYPE-C TYPE-S TYPE-P SQUARE CUT OR CLEAN CUT CUTTER STANDARD CUTTER “V” OR PINCH CUTTTER

Model No. Weight Length Width Height lb kg inch mm inch mm inch mm HRC-16 17.6 8 14.1 360 3.1 80 7 180 HRC-20 26.4 12 16.1 410 3.9 100 8.2 210 HRC-30 77 35 21.4 545 6.29 160 10.4 265 HRC-40 99 45 24.2 615 7.8 200 15.7 400

Model No. Dia capacity (in.) Grade of steel to be cut Tensile strength  N/mm2 Shear Strength N/mm2 Cutting  Force reqd. kN Cutting force generated by cutter kN HRC-16 5/8” (16mm) Mild Steel 700 420 84.5 106 HRC-20 0.79” (20mm) Mild Steel 700 420 132 168 HRC-30 1.18” (30mm) Mild Steel 700 420 297 480 HRC-40 1.57” (40mm) Mild Steel 700 420 528 830

Model No. Dia capacity (in.) Grade of steel to be cut Tensile strength  N/mm2 Shear Strength N/mm2 Cutting  Force reqd. kN Cutting force generated by cutter kN HRC-16 0.55” (14mm) Low Alloy Steel 1000 600 92.5 106 HRC-20 0.67” (17mm) Low Alloy Steel 1000 600 136 168 HRC-30 1.02” (26mm) Low Alloy Steel 1000 600 318.5 480 HRC-40 1.30” (33mm) Low Alloy Steel 1000 600 513 830

Model No. Dia capacity (in.) Grade of steel to be cut Tensile strength  N/mm2 Shear Strength N/mm2 Cutting  Force reqd. kN Cutting force generated by cutter kN HRC-16 0.47” (12mm) Medium Alloy Steel 1300 780 88 106 HRC-20 0.59” (15mm) Medium Alloy Steel 1300 780 138 168 HRC-30 0.90” (23mm) Medium Alloy Steel 1300 780 324 480 HRC-40 1.14” (29mm) Medium Alloy Steel 1300 780 515 830

Model No. Dia capacity (in.) Grade of steel to be cut Tensile strength  N/mm2 Shear Strength N/mm2 Cutting  Force reqd. kN Cutting force generated by cutter kN HRC-16 0.39” (10mm) High Alloy Steel 1600 960 75.5 106 HRC-20 0.51” (13mm) High Alloy Steel 1600 960 127.5 168 HRC-30 0.79” (20mm) High Alloy Steel 1600 960 302 480 HRC-40 1.02” (26mm) High Alloy Steel 1600 960 510 830

NOTE

Considering shear strength to be 60% of tensile strength. Radial Piston pump and directional controlled solenoid valve of capacity 550 bar, Imported from Switzerland. If you send us the specification (Tensile strength and diameter of Bar) we shall recommend the right cutter for your application.