FEATURES
- Heavy duty steel strap cutter
- For Use With Steel Strap Cutting
- Unique Design
- Easy to operate & maintain
- Less cutting pressure required
SPECIAL FEATURES
Top cutter blade is elliptical and manufactured from high grade tool steel and hardened to 58/60Rc.
It has 4 cutting edges. Bottom cutter blade manufactures from rolled medium carbon steel and hard faced with cobalt base alloy that’s why tapered edge doesn’t break and has longer life.
SPECIFICATIONS
Item: Manual Strap Cutter
Tool Power Source: Manual
For Strapping Width: Up to 11/4” // 31.75mm
For Strapping Thickness: Up to 0.05″ // 1.27mm
Dimensions (L X W X H): 698.5mm x 50.8mm x 203.2mm // 27.5” x 2”x 8”
Material: Steel
Tool Weight: 8.2lbS. // 3.75Kg
OPERATIONAL MANUAL
- Place one gloved hand on the strap and position yourself so that you are not in the path of the strapping.
- Cut the strap several inches away from your hand. The cut should be made so that the flying strap is too short to reach any part of the body.
- Strapping should be cut squarely, not at an angle to avoid sharp strap edge.
- Immediately dispose of all strapping to avoid accidents and injury.
SAFETY INSTRUCTIONS
- Wear your safety shoes, gloves, helmet and safety glasses at all times.
- Remove oil or grease from your hands, tools and from the floor and area where you will be working.
- Use proper cutting tool as per type, size of the strap to be cut.
- Keep fingers way from areas that can pinch or cut. These areas are located at the front of the tool.
- Only use equipment recommended for the strap. “SC-150” is recommended only for 0.25mm to 1.27mm thick x 9.5mm to 31.75mm wide strap.
WARNING
- Improper use may result in blindness, severe laceration, amputation.
0 Reviews
There are no reviews yet.