FEATURES
- Medium duty pusher type Manual Steel Strap Tensioner.
- For Use with Steel Strapping.
- Compact Feed wheel design allows unlimited strap uptake.
- Easy to operate and maintain.
- Very handy and can be used in a small space.
- Designed for round objects, curved or irregular shaped packages.
- Special Feature Base frame from forged alloy steel.
SPECIFICATIONS
Item: Strapping Tensioner
Tool Power Source: Manual
For Strapping Width: 3/4” to 11/4” // 19.05mm to 31.75mm
For Strapping Thickness: Up to 0.035″ // 0.89mm
Dimension (L X W X H): 350mm x 105mm x 140mm // 13.77” x4.13” x5.51”
Material: Steel
Weight: 4.250kg // 9.36lbs.
OPERATIONAL MANUAL
- Pull the strap from the coil & cut the strap as required length. Apply the strap around the package. Then insert one end of the strap into the seal in such a way so that flat surface of the seal remains facing outside the strap.
- Other end of the strap insert through the seal. Then hold the overlap portion of the straps with your left hand.
- Hold the tool by right hand. Insert bottom strap under the gripper of the tool. Pull the handle lock lever to grip the strap by the gripper.
- Adjust the windlass shaft in such a way so that the slot should be parallel with the base. Insert the top strap into the slot.
- Move the tensioning handle up & down until the proper tension achieved.
- Seal the strap by using the recommended Sealer.
- Cut the wounded strap by pulling up the cam handle which is fitted in front of the tool.
- Unlock the gripper by pressing down the tensioning handle.
SAFETY INSTRUCTIONS
- Before using the tool, read the operating instructions carefully.
- Wear hand gloves, safety shoe, Helmet, goggles during operation.
- Do not stand in line with the strap while it is tensioned. The strap may break.
- Do not put your fingers into the windlass shaft & gripper area.
- Do not put your hand under the strap on the job while strap is being tensioned.
- Only use equipment recommended for the strap.`HTUS-50C´ is recommended only for 1.10 mm to 1.27 mm thk. X 31.75 mm width.
0 Reviews
There are no reviews yet.